Ottawa & Orléans
Floating and glue-down LVP on properly prepped subfloors. The prep is what makes it last.
Luxury vinyl plank installation in Ottawa — floating or glue-down on properly prepared subfloors. LVP is durable, waterproof, and works well in basements, kitchens, and high-traffic areas. The installation quality depends almost entirely on what's under it: subfloor flatness, moisture control, and correct expansion gaps. I assess the subfloor before installation begins and address anything that will cause the floor to fail before the first plank goes down.
The Installation Process
I check subfloor flatness, fastening, moisture levels, and condition before recommending a product or method. Problems caught here cost far less to fix than problems caught after installation.
High spots are ground down. Low spots are filled with appropriate levelling compound. Most LVP manufacturers require 3/16″ tolerance over 10 feet — I hit that before installation starts.
Floating click-lock is right for most residential applications. Glue-down is better for large commercial areas, heated subfloors, or rooms where movement is a concern. I recommend based on your specific situation.
LVP expands and contracts with temperature. Correct expansion gaps at walls, columns, and transitions are required — and not optional. Floors that buckle in summer almost always have this gap missing or compressed.
Stair nosing, T-mouldings, reducer strips, and threshold transitions properly fitted and fastened — not pinched in place and relying on baseboards to hold them.
Cuts at kitchen islands, bathroom vanities, and built-ins handled carefully — undercutting door frames and casings where needed for a clean, finished result.
The Most Important Step
LVP gets a reputation for being easy to install because it clicks together without glue. That's true — but the subfloor preparation is where most failed installations begin. Here's what causes the three most common LVP failures:
When the subfloor has high spots, the plank bridges them and flexes with each step. That flex creates the hollow, clicky sound that homeowners report after installation. It also stresses the locking mechanism. High spots need to be ground flat — not covered with underlayment.
Low spots allow the plank to deflect when walked on. Over time, the repeated flexing cracks the locking joint between planks — and once the joint separates, the floor is irreparable without replacement. Low spots are filled with levelling compound, not accepted as-is.
Even "waterproof" LVP can delaminate and swell at the edges when the subfloor beneath it has elevated moisture — particularly in basements and on concrete slabs. Moisture testing before installation is part of my process. A vapour retarder is installed where required by the manufacturer.
Where I Work
Serving Ottawa and surrounding communities for luxury vinyl plank installation.
Common Questions
Ready to Start?
Call or email to discuss your project. I visit in person, assess the subfloor, and give you a written quote with no surprises.