Ottawa & Orléans
Solid and engineered hardwood, nail-down or glue-down — properly acclimated and laid out for the room, not just the longest wall.
Hardwood flooring installation in Ottawa. Solid and engineered hardwood, nail-down or glue-down, properly acclimated before installation begins. The layout is planned for the room — balanced, with racking patterns that avoid short pieces at doorways and sightlines — not just started from the longest wall because that was easiest. Every job is done personally by Joseph Leger. No crews, no subcontractors.
The Installation Process
Hardwood needs to reach equilibrium with the moisture content of your home before installation. Skipping acclimation causes cupping, crowning, and gapping after the floor is installed — problems that can't be fixed without removing the floor.
Squeaky subfloors are addressed before hardwood goes down. Flatness is assessed and corrected. Subfloor fastening is checked and supplemented where needed to prevent movement under the new floor.
Nail-down is standard over wood subfloors. Glue-down or float is used over concrete. I recommend the correct method for your substrate and the specific hardwood product you've chosen.
Stair treads and risers in matching hardwood — routed nosings, proper adhesive, and surface-nail or hidden fastening depending on the stair construction.
Transitions to tile, carpet, or other flooring surfaces fitted and fastened correctly — not just dropped in with double-sided tape and a prayer.
Boards are racked before installation to distribute colour variation and avoid clustering of similar pieces. End-joints are staggered a minimum of 6 inches to avoid H-joints and weak seam lines.
Ottawa Conditions
Ottawa has one of the wider humidity ranges of any major Canadian city — dry winters and humid summers. Hardwood is sensitive to moisture content changes, and wood that moves significantly between seasons will show it in the floor. Here's what I address on every hardwood installation in Ottawa:
Ottawa's relative humidity can swing from under 20% in winter (heated homes with no humidifier) to over 70% in summer. A hardwood floor installed without acclimating to your specific home's environment will shrink in winter and expand in summer — causing gaps, cupping, or buckling depending on the direction of movement. Acclimation time varies by product and season; I advise on the required period during the quote.
Every hardwood installation requires an expansion gap at walls, stairs, columns, and fixed objects. The size of this gap depends on the species, product width, and expected seasonal movement. Covering it with baseboard is fine — but compressing it with furniture or leaving it too small creates a floor that buckles when the wood expands.
Engineered hardwood over concrete slabs requires a vapour retarder or moisture control underlayment. Ottawa slab moisture levels should be tested before installation — especially in finished basements, where slabs often read higher than expected even when the space feels dry.
Where I Work
Serving Ottawa and surrounding communities for hardwood flooring installation.
Common Questions
Ready to Start?
I visit in person, assess your subfloor and space, and give you a written quote. No subcontractors — Joseph does every job.