Ottawa & Orléans
Full tile work, waterproofing, custom showers, and heated floors — every step done by Joseph Leger personally.
Full bathroom renovation tile work in Ottawa. I handle the tile installation, waterproofing, shower builds, heated floor installation, and finishing details. Every step done by me — from substrate assessment to final caulk line. I use Schluter KERDI waterproofing membrane on all shower builds, and all precision cuts — niches, L-cuts, radius profiles — are made on the PIKUS 130 bridge saw for clean, tight-fitting edges that hold grout properly and look right.
Scope of Work
Walk-in showers built from scratch with KERDI membrane, flood-tested before tile, with niche cutouts and bench seats precision-cut on the PIKUS 130.
Bathroom floor tile on properly prepped substrates — flat, sound, and moisture-controlled before the first tile is set.
Feature walls, tub surrounds, full-height tile — cut precisely, set with full coverage, grouted with consistent joint width.
Schluter DITRA-HEAT or Mapei radiant systems roughed in at the right point in the renovation — before tile, not after.
Three-wall tub surrounds with proper waterproofing at the transition points, movement joints caulked at changes of plane.
Schluter KERDI on shower walls and pan, Mapei waterproofing on bathroom floors and wet areas as required. 24-hour flood test before tile.
The Technical Approach
Bathroom renovations fail when shortcuts are taken on substrate prep and waterproofing — problems that are invisible until water is already in the wall. My process is built around preventing that.
I assess and correct subfloor and wall flatness before installation. Tile set over a wavy substrate cracks. Grout in uneven joints pops. Flatness is not optional.
Every shower I build gets a 24-hour flood test before tile is set. If there's a problem with the membrane, we find it before it's covered with tile and grout.
Tile layout is planned for the room — centred, balanced, with cuts landed in logical places. No half-tiles in obvious sightlines.
I use a Hilti HEPA dust extraction unit throughout the job. Tile dust is fine silica — HEPA extraction keeps it out of your home and out of the air.
You speak with Joseph. Joseph does the work. There is no crew, no handoff, and no one who doesn't know how the previous step was done.
Certified in both Schluter waterproofing systems and Mapei installation products — the two most rigorous manufacturer certifications in the tile trade.
Where I Work
I serve Ottawa and the surrounding communities — including all neighbourhoods listed below.
Common Questions
Ready to Start?
Call or email to discuss your bathroom project. I visit in person, assess the space, and provide a written quote.
For full service details, visit the Bathroom Renovations service page.